Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents

Checklist

  •  User Stories Documented
  •  User Stories Reviewed
  •  Design Reviewed
  •  APIs reviewed
  •  Release priorities assigned
  •  Test cases reviewed
  •  Blog post

Introduction 

There are a few use cases that we want to support with this feature. The first is to support a use case where the pipeline is a geofencing use case, where the pipeline is processing user locations, and wants to send alerts when a user enters or leaves a geo fence. Similar use cases include pipelines that are reading user biometric data that need to send alerts if user heart rate exceeds a certain value, or pipelines that read machine cpu usage that need to send alerts if cpu usage exceeds a certain value. In these use cases, some uncommon event occurs that must be acted on by a separate system. The events that trigger these alerts still need to be processed by the rest of the pipeline, there is just some side effect that is triggered once they are observed.

Goals

The goal is to allow stages in a pipeline to emit alerts, which can be configured to be published to TMS or to Kafka.

User Stories 

  • As a pipeline developer, I want to be able to create a pipeline where alerts are published to Kafka or TMS when some condition is met
  • As a pipeline developer, I want to be able to create some pipelines that publish alerts and some that do not, even when the conditions are met
  • As a pipeline developer, I want to be able to configure which topic alerts are published to
  • As a pipeline developer, I want to be able to tell which plugins can emit alerts and which plugins cannot
  • As a pipeline developer, I want to be able to aggregate alerts before publishing them, to avoid duplicate alerts
  • As a cluster administrator, I want to be able to see how many alerts were published for a pipeline run
  • As a plugin developer, I want to be able to write arbitrary logic to control when to publish alerts
  • As a plugin developer, I want to be able to indicate which plugins can emit alerts
  • As a plugin developer, I want to be able to set a payload for any alert emitted
  • As a plugin developer, I want to be able to write a plugin that publishes alerts
  • As an alert consumer, I want the alert to contain the namespace, pipeline name, stage name, and payload to be present in the alert

Design

At a high level, we would like each existing plugin type (except sinks) to be able to emit alerts. An alert is not an arbitrary record, but must conform to a specific schema. Each plugin will indicate whether it can emit notifications or not, which can be reflected in the UI by an additional 'port'. When a pipeline stage is connected to a new 'AlertPublisher' plugin type, any notifications emitted by that stage will be sent to the AlertPublisher for actual publishing.

Image Added

Image Removed 

When the actual alerts are published is left up to the pipeline. If a AlertPublisher plugin is not attached to a stage, any alerts emitted by the stage will be dropped.

Approach

Pipeline Config

There will be no changes to the structure of the pipeline config. If a AlertPublisher plugin type is connected to a stage, any alerts emitted by the stage will be sent to the publisher. The pipeline depicted in the image above would look something like:

No Format{ "stages": [ { "name": "source", "plugin": { "type": "batchsource", ... } }, { "name": "transform", "plugin": { "type": "transform", ... } }, { "name": "sink", "plugin": { "type": "batchsink", ... } }, { "name": "notificationemitter", "plugin": { "type": "alertpublisher", ... } } ], "connections": [ { "from": "source", "to": "transform" }, { "from": "transform", "to": "sink" }, { "from": "transform", "to": "notificationemitter" } ] }

Publishing Alerts

Alerts can be published using a new AlertPublisher plugin type:

Code Block
public abstract class AlertPublisher extends PipelineConfigurable, implements StageLifecycle<AlertPublisherContext> {
  private MessagingContext context;
  
  @Override
  public void initialize(AlertPublisherContext context) throws Exception {
    this.context = context;
  }

  @Override
  public void publish(Iterator<Alert> payloadsalerts) throws Exception {
  }

  @Override
  public void destroy() {
    // no-op
  }
}
 
public interface AlertPublisherContext extends MessagingContext, StageContext {
}
 
public interface Alert {
 
  // get the stage the alert was emitted from
  String getStageName();
  
  // get the payload of the alert
  Map<String, StringString> getPayload();
}

The publish method receives an Iterator of Alerts in case it wants to do some dedup or aggregation logic before actually publishing anything. We'll also need to add a getNamespace() and getPipelineName() methods to StageContext, as MessagePublisher requires the namespace, and publishers need access to the pipeline name.

This approach means that it is the plugin determines the structure of the alert that is published, meaning whatever consumes the alert must be aware of the format.

Emitting Alerts

The Emitter interface will be enhanced to allow emitting an alert:

Code Block
public interface Emitter<T> {

  // existing method
  void emit(T value);

  // existing method
  void emitError(InvalidEntry<T> invalidEntry);

  void emitAlert(StringMap<String, String> payload);
}

Plugin Alert Port Indication

Approach 1

Though every plugin will be able to emit notifications through the programmatic API, most plugins will not make use of this functionality. Users should be given some indication of which plugins make use of it and which do not. One way to do this is to annotate the plugin:

Code Block
@Plugin(type = Transform.PLUGIN_TYPE)
@Name("Alert")
@EmitsAlerts
public class AlertTransform extends Transform {
 
}

The EmitsAlerts will be an annotation only in the cdap-etl-api, as it is specific to pipelines. It is not a CDAP annotation. In order for the UI to see it, it must be somehow exposed through the RESTful API in a generic way. One way to do this is to add an 'annotations' field to the PluginClass object:

No FormatGET /v3/namespaces/<namespace-id>/artifacts/<artifact-name>/versions/<artifact-version>/extensions/<plugin-type>/plugins/<plugin-name> [ { "name": "JavaScript", "type": "transform", "annotations": [ "EmitsAlerts" ], "description": "Executes user-provided JavaScript that transforms one record into zero or more records.", "className": "co.cask.hydrator.plugin.transform.JavaScriptTransform", "artifact

The UI should have some way of indicating which plugins can possibly emit alerts and which ones cannot. Since this is really just a UI thing, we can add a property to the widgets json config

No Format
{
  "metadata": {
    "spec-version": "1.3",
    "emitsAlerts": true
  },
  "configuration-groups": [ ],
  "outputs": []
}

Note that this can also be done for plugins that can emit errors.

Aggregating Alerts

Each stage will be able to specify some aggregations to perform on the alerts it emits. Aggregations are useful when the pipeline receives many records that trigger an alert, but only wants to publish a single alert. For example, when receiving heartbeat data, a transform may alert if the heartbeat exceeds a threshold. However, there may be a heartbeat measurement for each user for each second, and we may only want to publish one alert for each user, not an alert for each second for each user. For example, suppose a transform emits alerts with payloads:

No Format
[
  { "userid": "abc", "name": "alice", "heartbeat": "180" },
  { "userid": "abc", "name": "alice", "heartbeat": "184" },
  { "userid": "abc", "name": "alice", "heartbeat": "182" },
  { "userid": "def", "name": "bob", "heartbeat": "200" },
  { "userid": "def", "name": "bob", "heartbeat": "198" },
  { "userid": "def", "name": "bob", "heartbeat": "202" }
]

The pipeline developer may want to aggregate these alerts to reduce them to:

No Format
[
  { "userid": "abc", "name": "alice", "avgheartbeat": "182" },
  { "userid": "def", "name": "bob", "avgheartbeat": "200" }
]

To support this, all stages in will be able to specify an alerts section that will support grouping alerts and performing simple aggregations:

No Format
{
  "stages": [
    { 
      "name": "transform",
      "plugin": { ... },
      "propertiesalerts": { ... }
        }"groupBy": [  ...
]

This would still make CDAP generic, as it knows nothing about what the custom annotation means, but allows the UI and data pipeline app to do special logic with the annotation. Note that this could also be done to indicate whether a plugin emits errors.

Approach 2

We could also extend (in cdap-data-pipeline) PluginConfig with class that contains a 'alertsEnabled' boolean field. Only plugins that use a conf with 'alertsEnabled' set to true would be allowed to emit alerts. The UI could also use this flag as a way to determine whether an alert port should be displayed.

No Format
public class AlertConfig extends PluginConfig {
  @Description("Whether this stage can emit alerts.")
  boolean alertsEnabled;
}

Approach 3

We could also make use of the Plugin Endpoint system that is currently used for schema propagation. Plugins would have to include an endpoint that returns whether it emits alerts or not.

Code Block
@Path("emitsAlerts")
public boolean getSchema(Conf conf) {
  return conf.threshold != null;
}
This has a benefit of not being static, which means a plugin could decide whether it might emit alerts depending on its configuration. However, this may also cause additional complication, as the alert port could potentially appear and disappear as the plugin is being configured. Downside are that it is more complicated, more work for the Plugin developer, and the Plugin Endpoint system does not support good error handling capabilities
"userid", "name" ], // optional. If not specified, all alerts will be aggregated into a single alert
        "aggregates": [ 
          {
            "name": "avgheartbeat",
            "function": "mean",
            "field": "heartbeat"
          }
        ]
      }
    },
    ...
  ],
  ...
}

Aggregates will be performed on the alert payloads. To start with, 'avg', 'sum', 'count', 'min', 'max' aggregate functions will be supported. If used, payload values will be interpreted as doubles.

Implementation

Alerts will be collected in the Spark Driver in memory (through the .collect() method), before being sent to an AlertPublisher. This is because we are not able to publish within a Spark closure, and in case the publisher wants to do some dedup logic or aggregation logic. This also means that users should be educated to avoid emitting a large number of alerts, or alerts with large payloads, as the driver could run out of memory. In MapReduce, tasks are also unable to publish to TMS. The program will need to write all alerts to a local FileSet, then read from the FileSet and publish everything at the end.

API changes

New Programmatic APIs

Emitter.emitAlert and AlertPublisher are new APIs.

Deprecated Programmatic APIs

 None

Modified REST APIs

PathMethodDescriptionResponse CodeResponse/v3/namespaces/<namespace-id>/artifacts/<artifact-name>/versions/<artifact-version>/extensions/<plugin-type>/plugins/<plugin-name>GETReturns the plugin class details

 

annotations field added

None

Deprecated REST API

None

CLI Impact or Changes

  • None

UI Impact or Changes

  • UI must be able to detect which plugins can emit notifications, and display a corresponding port
  • UI must display metrics for notifications emitted

Security Impact 

This feature will use TMS, so any authorization added to TMS will affect this feature.

Impact on Infrastructure Outages 

None

Test Scenarios

Test IDTest DescriptionExpected Results
   
   
   
   

Releases

Release X.Y.Z

Release X.Y.Z

Related Work

  • Work #1
  • Work #2
  • Work #3

 

Future work