Goals

1. Authorize a subset of operations on CDAP entities using Apache Sentry

2. Make the authorization system pluggable. Support the following two systems to begin with:

   1. Sentry based

   2. CDAP Dataset based

Checklist

•  User stories documented (Rohit/Bhooshan)
•  User stories reviewed (Nitin)
•  Design documented (Rohit/Bhooshan)
•  Design reviewed (Andreas)
•  Feature merged (Rohit/Bhooshan)
•  Examples and guides (Rohit)
•  Integration tests (Bhooshan) 
•  Documentation for feature (Rohit/Bhooshan)
•  Blog post 

...

User Stories

• As a CDAP system, I should be able to integrate with Apache Sentry for fine-grained role-based access controls of select CDAP operations 
• As a CDAP admin, I should be able to easily configure Sentry to work with CDAP on different type of cluster (ex: CDH, CM cluster etc). 
• As a CDAP admin, I should be able to create/update/delete roles in Apache Sentry
• As a CDAP admin, I should be able to add users/groups to roles in Apache Sentry
• As a CDAP admin, I should be able to turn authorization on/off easily for entire CDAP instance
• As a CDAP system, I should be able to authorize the following requests
• Namespace create/update/delete
• Application deployment
• Program start/stop
• Stream read/write
  These operations are a subset that represents the various 'kinds' of operations allowed in CDAP

Scenarios

Scenario #1

• D-Rock is an IT-Admin extra-ordinaire who has just been tasked with adding authorizing access to entities in CDAP on the cluster he manages. 
• D-Rock is already familiar with Apache Sentry, since he has used it for authorization in other projects like Apache HDFS, Apache Hive, Apache Sqoop, etc. 
• He would rather not learn a new authorization system. He would instead prefer that Apache Sentry be used to provide Role Based Access Control to CDAP entities as well.
• As part of this, he would also like a streamlined installation and configuration experience with Apache Sentry and CDAP, including detailed instructions.

Scenario #2

• D-Rock manages a variety of CDAP clusters in dev/smoke/qa/staging environments along with the prod environment.
• For these environments, he would like to be able to turn authorization on/off easily with a switch for the CDAP instance, depending on the need at a given time.

Scenario #3

• Ideally, D-Rock would like to be able to authorize all operations on all entities in CDAP. 
• However, this can be rolled out in phases. In the initial phase, he would like to control who can:
  • Create/update/delete a namespace
    • Only users with WRITE permission on CDAP instance should be able to perform this operation.
    • A property in sentry-site.xml will decide a set of users who have admin permission on cdap instance. These admins can then later grant permissions to other users.
  • Deploy an application in a namespace
    • Only users with WRITE permission on the namespace should be able to perform this operation
    • One the application is deployed the the user who deployed becomes the ADMIN of the application. 
  • Start/stop a program
    • Only users with READ permission on the namespace and application, and EXECUTE permission on the program should be able to perform this operation
    • Only users with ADMIN permission on the program can set preference for the program
    • Only users with WRITE permission can provide runtime args
  • Read/write to a stream
    • Only users with READ privilege on the namespace and READ permission on the stream should be able to read from the stream
    • Only users with READ privilege on the namespace and WRITE permission on the stream should be able to write to the stream
    • Note: We have decided not to handle views separately. A user have same permission on all views of a stream as what it has on the stream. 

Entities, Operations and Privileges

Entity	Operation	Required Privileges	Resultant Privileges
Namespace	create	ADMIN (Instance)	ADMIN (Namespace)
	update	ADMIN (Namespace)
	list	READ (Instance)
	get	READ (Namespace)
	delete	ADMIN (Namespace)
	set preference	WRITE (Namespace)
	get preference	READ (Namespace)
	search	READ (Namespace)
Artifact	add	WRITE (Namespace)	ADMIN (Artifact)
	delete	ADMIN (Artifact)
	get	READ (Artifact)
	list	READ (Namespace)
	write property	ADMIN (Artifact)
	delete property	ADMIN (Artifact)
	get property	READ (Artifact)
	refresh	WRITE (Instance)
	write metadata	ADMIN (Artifact)
	read metadata	READ (Artifact)
Application	deploy	WRITE (Namespace)	ADMIN (Application)
	get	READ (Application)
	list	READ (Namespace)
	update	ADMIN (Application)
	delete	ADMIN (Application)
	set preference	WRITE (Application)
	get preference	READ (Application)
	add metadata	ADMIN (Application)
	get metadata	READ (Application)
Programs	start/stop/debug	EXECUTE (Program)
	set instances	ADMIN (Program)
	list	READ (Namespace)
	set runtime args	EXECUTE (Program)
	get runtime args	READ (Program)
	get instances	READ (Program)
	set preference	ADMIN (Program)
	get preference	READ (Program)
	get status	READ (Program)
	get history	READ (Program)
	add metadata	ADMIN (Program)
	get metadata	READ (Program)
	emit logs	WRITE (Program)
	view logs	READ (Program)
	emit metrics	WRITE (Program)
	view metrics	READ (Program)
Streams	create	WRITE (Namespace)	ADMIN (Stream)
	update properties	ADMIN (Stream)
	delete	ADMIN (Stream)
	truncate	ADMIN (Stream)
	enqueue asyncEnqueue batch	WRITE (Stream)
	get	READ (Stream)
	list	READ (Namespace)
	read events	READ (Stream)
	set preferences	ADMIN (Stream)
	get preferences	READ (Stream)
	add metadata	ADMIN (Stream)
	get metadata	READ (Stream)
	view lineage	READ (Stream)
	emit metrics	WRITE (Stream)
	view metrics	READ (Stream)
Datasets	list	READ (Namespace)
	get	READ (Dataset)
	create	WRITE (Namespace)	ADMIN (Dataset)
	update	ADMIN (Dataset)
	drop	ADMIN (Dataset)
	executeAdmin (exists/truncate/upgrade)	ADMIN (Dataset)
	add metadata	ADMIN (Dataset)
	get metadata	READ (Dataset)
	view lineage	READ (Dataset)
	emit metrics	WRITE (Dataset)
	view metrics	READ (Dataset)

NOTE: Cells marked green are in scope for 3.4

Design

This feature can be broken down into the following main parts, in no specific order:

Authorization in CDAP

The authorization system in CDAP will be pluggable, and the backend can be provided by external systems like Apache Sentry/Ranger. It provides:

• Authorization Enforcement hooks during various operations within CDAP, that throw AuthorizationException if the operation is not authorized.
• ACL Management

This system exposes a set of interfaces defined below. 

AuthEnforcer

The AuthEnforcer interface provides a way to check if an operation is authorized. At various points in the CDAP code (NamespaceHttpHandler, AppLifecycleHttpHandler, ProgramLifecycleHttpHandler, StreamHandler in 3.4), this interface will be used to check if an operation is authorized.

...

...

Goals

1. Authorize a subset of operations on CDAP entities using Apache Sentry

2. Make the authorization system pluggable. Support the following two systems to begin with:

   1. Sentry based

   2. CDAP Dataset based

Checklist

•  User stories documented (Rohit/Bhooshan)
•  User stories reviewed (Nitin)
•  Design documented (Rohit/Bhooshan)
•  Design reviewed (Andreas)
•  Feature merged (Rohit/Bhooshan)
•  Examples and guides (Rohit)
•  Integration tests (Bhooshan) 
•  Documentation for feature (Rohit/Bhooshan)
•  Blog post 

...

User Stories

• As a CDAP system, I should be able to integrate with Apache Sentry for fine-grained role-based access controls of select CDAP operations 
• As a CDAP admin, I should be able to easily configure Sentry to work with CDAP on different type of cluster (ex: CDH, CM cluster etc). 
• As a CDAP admin, I should be able to create/update/delete roles in Apache Sentry
• As a CDAP admin, I should be able to add users/groups to roles in Apache Sentry
• As a CDAP admin, I should be able to turn authorization on/off easily for entire CDAP instance
• As a CDAP system, I should be able to authorize the following requests
• Namespace create/update/delete
• Application deployment
• Program start/stop
• Stream read/write  (Not Implemented in 3.4)
  These operations are a subset that represents the various 'kinds' of operations allowed in CDAP

Scenarios

Scenario #1

• D-Rock is an IT-Admin extra-ordinaire who has just been tasked with adding authorizing access to entities in CDAP on the cluster he manages. 
• D-Rock is already familiar with Apache Sentry, since he has used it for authorization in other projects like Apache HDFS, Apache Hive, Apache Sqoop, etc. 
• He would rather not learn a new authorization system. He would instead prefer that Apache Sentry be used to provide Role Based Access Control to CDAP entities as well.
• As part of this, he would also like a streamlined installation and configuration experience with Apache Sentry and CDAP, including detailed instructions.

Scenario #2

• D-Rock manages a variety of CDAP clusters in dev/smoke/qa/staging environments along with the prod environment.
• For these environments, he would like to be able to turn authorization on/off easily with a switch for the CDAP instance, depending on the need at a given time.

Scenario #3

• Ideally, D-Rock would like to be able to authorize all operations on all entities in CDAP. 
• However, this can be rolled out in phases. In the initial phase, he would like to control who can:
  • Create/update/delete a namespace
    • Only users with WRITE permission on CDAP instance should be able to perform this operation.
    • A property in sentry-site.xml will decide a set of users who have admin permission on cdap instance. These admins can then later grant permissions to other users.
  • Deploy an application in a namespace
    • Only users with WRITE permission on the namespace should be able to perform this operation
    • One the application is deployed the the user who deployed becomes the ADMIN of the application. 
  • Start/stop a program
    • Only users with READ permission on the namespace and application, and EXECUTE permission on the program should be able to perform this operation
    • Only users with ADMIN permission on the program can set preference for the program
    • Only users with WRITE permission can provide runtime args
  • Read/write to a stream
    • Only users with READ privilege on the namespace and READ permission on the stream should be able to read from the stream
    • Only users with READ privilege on the namespace and WRITE permission on the stream should be able to write to the stream
    • Note: We have decided not to handle views separately. A user have same permission on all views of a stream as what it has on the stream. 

Entities, Operations and Privileges

Entity	Operation	Required Privileges	Resultant Privileges
Namespace	create	ADMIN (Instance)	ADMIN (Namespace)
	update	ADMIN (Namespace)
	list	READ (Instance)
	get	READ (Namespace)
	delete	ADMIN (Namespace)
	set preference	WRITE (Namespace)
	get preference	READ (Namespace)
	search	READ (Namespace)
Artifact	add	WRITE (Namespace)	ADMIN (Artifact)
	delete	ADMIN (Artifact)
	get	READ (Artifact)
	list	READ (Namespace)
	write property	ADMIN (Artifact)
	delete property	ADMIN (Artifact)
	get property	READ (Artifact)
	refresh	WRITE (Instance)
	write metadata	ADMIN (Artifact)
	read metadata	READ (Artifact)
Application	deploy	WRITE (Namespace)	ADMIN (Application)
	get	READ (Application)
	list	READ (Namespace)
	update	ADMIN (Application)
	delete	ADMIN (Application)
	set preference	WRITE (Application)
	get preference	READ (Application)
	add metadata	ADMIN (Application)
	get metadata	READ (Application)
Programs	start/stop/debug	EXECUTE (Program)
	set instances	ADMIN (Program)
	list	READ (Namespace)
	set runtime args	EXECUTE (Program)
	get runtime args	READ (Program)
	get instances	READ (Program)
	set preference	ADMIN (Program)
	get preference	READ (Program)
	get status	READ (Program)
	get history	READ (Program)
	add metadata	ADMIN (Program)
	get metadata	READ (Program)
	emit logs	WRITE (Program)
	view logs	READ (Program)
	emit metrics	WRITE (Program)
	view metrics	READ (Program)
Streams	create	WRITE (Namespace)	ADMIN (Stream)
	update properties	ADMIN (Stream)
	delete	ADMIN (Stream)
	truncate	ADMIN (Stream)
	enqueue asyncEnqueue batch	WRITE (Stream)
	get	READ (Stream)
	list	READ (Namespace)
	read events	READ (Stream)
	set preferences	ADMIN (Stream)
	get preferences	READ (Stream)
	add metadata	ADMIN (Stream)
	get metadata	READ (Stream)
	view lineage	READ (Stream)
	emit metrics	WRITE (Stream)
	view metrics	READ (Stream)
Datasets	list	READ (Namespace)
	get	READ (Dataset)
	create	WRITE (Namespace)	ADMIN (Dataset)
	update	ADMIN (Dataset)
	drop	ADMIN (Dataset)
	executeAdmin (exists/truncate/upgrade)	ADMIN (Dataset)
	add metadata	ADMIN (Dataset)
	get metadata	READ (Dataset)
	view lineage	READ (Dataset)
	emit metrics	WRITE (Dataset)
	view metrics	READ (Dataset)

NOTE: Cells marked green are in scope for 3.4

Design

This feature can be broken down into the following main parts, in no specific order:

Authorization in CDAP

The authorization system in CDAP will be pluggable, and the backend can be provided by external systems like Apache Sentry/Ranger. It provides:

• Authorization Enforcement hooks during various operations within CDAP, that throw AuthorizationException if the operation is not authorized.
• ACL Management

This system exposes a set of interfaces defined below. 

AuthEnforcer

The AuthEnforcer interface provides a way to check if an operation is authorized. At various points in the CDAP code (NamespaceHttpHandler, AppLifecycleHttpHandler, ProgramLifecycleHttpHandler, StreamHandler in 3.4), this interface will be used to check if an operation is authorized.

interface AuthEnforcer {
	/**
     * Enforces authorization for the specified {@link Principal} for the specified {@link Action} on the specified {@link EntityId}.
     *
     * @param principal the principal that performs the actions. This could be a user, group or a role
     * @param entity the entity on which an action is being performed
     * @param action the action being performed
     * @throws AuthorizationException if the principal is not authorized to perform action on the entity
     */
	void enforce(Principal principal, EntityId entity, Action action) throws AuthorizationException;
}

Authorizer

This interface allows CDAP admins to grant/revoke permissions for specific operations on specific CDAP entities to specified Principals. It will be used by the ACL Management module, which may or may not reside in CDAP for the purposes of integration with Apache Sentry  TBD.

public interface Authorizer {
  /**
   * Initialize the {@link Authorizer}. Authorization extensions can use this method to access an
   * {@link AuthorizationContext} that allows them to interact with CDAP for operations such as creating and accessing
   * datasets, executing dataset operations in transactions, etc.
   *
   * @param context the {@link AuthorizationContext} that can be used to interact with CDAP
   */
  void initialize(AuthorizationContext context) throws Exception;

  /**
   * Enforces authorization for the specified {@link Principal} for the specified {@link Action} on the specified
   * {@link EntityId}.
   *
   * @param entity the {@link EntityId} on which authorization is to be enforced
   * @param principal the {@link Principal} that performs the actions
   * @param action the {@link Action} being performed
   * @throws UnauthorizedException if the principal is not authorized to perform action on the entity
   * @throws Exception if any other errors occurred while performing the authorization enforcement check
   */
  void enforce(EntityId entity, Principal principal, Action action) throws Exception;

  /**
   * Grants a {@link Principal} authorization to perform a set of {@link Action actions} on an {@link EntityId}.
   *
   * @param entity the {@link EntityId} to whom {@link Action actions} are to be granted
   * @param principal the {@link Principal} that performs the actions. This could be a user, or role
   * @param actions the set of {@link Action actions} to grant.
   */
  void grant(EntityId entity, Principal principal, Set<Action> actions) throws Exception;

  /**
   * Revokes a {@link Principal principal's} authorization to perform a set of {@link Action actions} on
   * an {@link EntityId}.
   *
   * @param entity the {@link EntityId} whose {@link Action actions} are to be revoked
   * @param principal the {@link principalPrincipal} that performs the actions. This could be a user, group or a role
  role
   * @param actions the set of {@link Action actions} to revoke
   * @param entity the entity on which an action is being performed
     * @param action the action being performed
 /
  void revoke(EntityId entity, Principal principal, Set<Action> actions) throws Exception;

  /**
   * Revokes all {@link Principal principals'} authorization to perform any {@link Action} on the given
   * @throws AuthorizationException if the principal is not authorized to perform action on the entity
     */
	void enforce(Principal principal, EntityId entity, Action action) throws AuthorizationException;
}

Authorizer

This interface allows CDAP admins to grant/revoke permissions for specific operations on specific CDAP entities to specified Principals. It will be used by the ACL Management module, which may or may not reside in CDAP for the purposes of integration with Apache Sentry  TBD.

interface Authorizer extends AuthEnforcer {
	/**
     * Grants a principal authorization to perform a set of actions on an entity.
     *
     * @param entity the entity on which an action is being performed
     * @param principal the Principal that performs the actions. This could be a user, group or a role
     * @param actions the set of actions to grant
     */
    void grant(EntityId entity, Principal principal, Set<Action> actions);

	/**
     * Grants a Principal authorization to perform all actions on an entity.
     *
     * @param entity the entity on which an action is being performed
 {@link EntityId}.
   *
   * @param entity the {@link EntityId} on which all {@link Action actions} are to be revoked
   */
  void revoke(EntityId entity) throws Exception;

  /**
   * Returns all the {@link Privilege} for the specified {@link Principal}.
   *
   * @param principal the {@link Principal} for which to return privileges
   * @return a {@link Set} of {@link Privilege} for the specified principal
   */
  Set<Privilege> listPrivileges(Principal principal) throws Exception;

  /********************************* Role Management: APIs for Role Based Access Control ******************************/
  /**
   * Create a role.
   *
   * @param role the {@link Role} to create
   * @throws RoleAlreadyExistsException if the the role to be created already exists
   */
  void createRole(Role role) throws Exception;

  /**
   * Drop a role.
   *
   * @param principalrole the Principal that performs the actions. This could be a user, group or a role
  {@link Role} to drop
   * @throws RoleNotFoundException if the role to be dropped is not found
   */
    void grantdropRole(EntityIdRole entity,role) Principalthrows principal)Exception;

  	/**
   * Add a role to the specified {@link Principal}.
   *
Revokes a principal's authorization* to@param performrole athe set{@link ofRole} actionsto onadd anto entity.the specified group
   * @param principal the {@link Principal} *to @param entityadd the entityrole onto
which an action is* being@throws performedRoleNotFoundException if the role to be *added @param principalto the principalprincipals thatis performs the actions. This could be a user, group or a role
 not found
   */
  void addRoleToPrincipal(Role role, Principal principal) throws Exception;

  /**
@param actions the set* ofDelete actionsa torole revokefrom permissionsthe onspecified {@link Principal}.
   */
   * void@param revoke(EntityId entity, Principal principal, Set<Action> actions);

	/**
 role the {@link Role} to remove from the specified group
   * Revokes a@param principal's authorizationthe to{@link performPrincipal} anyto actionremove onthe anrole entity.from
   * @throws *RoleNotFoundException if the role to be *removed @paramto entitythe theprincipals entityis onnot whichfound
an action is being*/
performed  void removeRoleFromPrincipal(Role role, Principal *principal) @paramthrows principalException;
the
principal that performs/**
the actions. This could* beReturns a user, group or a role
     */
    void revoke(EntityId entity, Principal principal);

    /**
 set of all {@link Role roles} for the specified {@link Principal}.
   *
   * @param principal the {@link Principal} to look up roles for
   * Revokes@return allSet principals'of authorization{@link toRole} perform any action on an entity.
 for the specified {@link Principal}
   */
  Set<Role> listRoles(Principal principal) *throws @paramException;
entity
the entity on/**
which an action is* beingReturns performedall available {@link Role}. Only a */super user can perform  void revoke(EntityId entity);
}

Where Principal is the entity performing actions defined as below:

public class Principal {
	enum PrincipalType {
		USER,
		GROUP,
		ROLE
	}
 
	private final String name;
	private final PrincipalType type;
 
	public Principal(String name, PrincipalType type) {
		this.name = name;
		this.type = type;
	}
 
	public String getName() {
		return name;
	}
 
	public PrincipalType getType() {
		return type;
	}
}

Integration with Apache Sentry will be achieved by implementations of these interfaces that delegate to Apache Sentry.

Integration with Apache Sentry

Integration with Apache Sentry involves the development of three main modules:

CDAP Sentry Binding

Here we will bind CDAP to SentryGenericServiceClient and to the operations on the client.

public class SentryAuthorizer implements Authorizer {

    void grant(EntityId entity, Principal Principal, Set<Action> actions){
		// do grant operation on sentry client with needed mapping/conversion
	}
	... 
	...
	private SentryGenericServiceClient getClient() throws Exception {
	  return SentryGenericServiceClientFactory.create(conf); // create sentry client from Configuration 
	}
}

CDAP Sentry Model

The CDAP Sentry Model defines the CDAP entities for whom access needs to be authorized via Apache Sentry. It will based off of the Sentry Generic Authorization Model. The CDAP Sentry Model will have the following components:

CDAPAuthorizable

This interface defines the CDAP entities that need to be authorized. It must implement Authorizable.

/**
 * This interface represents an authorizable resource in the CDAP component.
 */
public interface CDAPAuthorizable extends Authorizable {

  public enum AuthorizableType {
	Instance,
    Namespace,
    Artifact,
    Application,
    Program,
    Dataset,
    Stream,
  };
  AuthorizableType getAuthzType();
}

The CDAPAuthorizable interface will have to be implemented for each authorizable entity defined by the AuthorizableType enum above.

CDAPAction and CDAPActionFactory

These classes will implement BitFieldAction and BitFieldActionFactory to define the types of actions on CDAP entities. These classes also allow you to define implies relationships between actions.

...

this operation.
   *
   * @return a set of all available {@link Role} in the system.
   */
  Set<Role> listAllRoles() throws Exception;

  /**
   * Destroys an {@link Authorizer}. Authorization extensions can use this method to write any cleanup code.
   */
  void destroy() throws Exception;
}

Where Principal is the entity performing actions defined as below:

public class Principal {
	enum PrincipalType {
		USER,
		GROUP,
		ROLE
	}
 
	private final String name;
	private final PrincipalType type;
 
	public Principal(String name, PrincipalType type) {
		this.name = name;
		this.type = type;
	}
 
	public String getName() {
		return name;
	}
 
	public PrincipalType getType() {
		return type;
	}
}

Integration with Apache Sentry will be achieved by implementations of these interfaces that delegate to Apache Sentry.

Integration with Apache Sentry

Integration with Apache Sentry involves the development of three main modules:

CDAP Sentry Binding

Here we will bind CDAP to SentryGenericServiceClient and to the operations on the client.

public class SentryAuthorizer implements Authorizer {

    void grant(EntityId entity, Principal Principal, Set<Action> actions){
		// do grant operation on sentry client with needed mapping/conversion
	}
	... 
	...
	private SentryGenericServiceClient getClient() throws Exception {
	  return SentryGenericServiceClientFactory.create(conf); // create sentry client from Configuration 
	}
}

CDAP Sentry Model

The CDAP Sentry Model defines the CDAP entities for whom access needs to be authorized via Apache Sentry. It will based off of the Sentry Generic Authorization Model. The CDAP Sentry Model will have the following components:

CDAPAuthorizable

This interface defines the CDAP entities that need to be authorized. It must implement Authorizable.

...

public class CDAPActionConstants {
  public static final String READ = "read";
  public static final String EXECUTE = "execute";
  public static final String WRITE = "write";
  public static final String ADMIN = "admin"; // this is read + write + execute + admin (create/update/delete)
}

Sentry Policy Engine

Resource URIs

Using the above authorizable model, resource URIs for CDAP entities in the Sentry Policy Engine will be as follows:

cdap:///instance=server1

Interaction Diagram

Use-case: App Deployment by an unauthorized user

Image Removed

Configuration

Sentry

sentry.cdap.provider

org.apache.sentry.provider.common.

HadoopGroupResourceAuthorizationProvider

org.apache.sentry.provider.db.generic.SentryGenericProviderBackend

CDAP

These properties will be defined in cdap-security.xml

security.authorization.enabled

security.authorizer.class

Role Management

To support RBAC (Role Based Access Control) such as Apache Sentry we will need to support role management through CDAP.

A user using RBAC should be able to:

• Create a role
• delete a role
• add role to principal (where principal can be of type user or group)
• remove role from a principal (where principal can be of type user or group)
• List roles
• List roles for principal
• List privileges for role

We will need to support this operation from through REST  APIs and also through cli. Below is the proposed APIs and CLI commands:

create role <role-name>

drop role <role-name>

["Role", "Role2"]

list roles

add role <role-name> to group/user <group/user-name>

remove role <role-name> from group/user <group/user-name>

["Role", "Role2"]

list roles for group/user <group/user-name>

["Privilege1", "Privilege2"]

list privileges for role <role-name>

/**
 * This interface represents an authorizable resource in the CDAP component.
 */
public interface CDAPAuthorizable extends Authorizable {

  public enum AuthorizableType {
	Instance,
    Namespace,
    Artifact,
    Application,
    Program,
    Dataset,
    Stream,
  };
  AuthorizableType getAuthzType();
}

The CDAPAuthorizable interface will have to be implemented for each authorizable entity defined by the AuthorizableType enum above.

CDAPAction and CDAPActionFactory

These classes will implement BitFieldAction and BitFieldActionFactory to define the types of actions on CDAP entities. These classes also allow you to define implies relationships between actions.

TODO: Think about ALL, ADMIN_ALL

public class CDAPActionConstants {
  public static final String READ = "read";
  public static final String EXECUTE = "execute";
  public static final String WRITE = "write";
  public static final String ADMIN = "admin"; // this is read + write + execute + admin (create/update/delete)
}

Sentry Policy Engine

Resource URIs

Using the above authorizable model, resource URIs for CDAP entities in the Sentry Policy Engine will be as follows:

cdap:///instance=server1

Interaction Diagram

Use-case: App Deployment by an unauthorized user

Image Added

Configuration

Sentry

sentry.cdap.provider

org.apache.sentry.provider.common.

HadoopGroupResourceAuthorizationProvider

org.apache.sentry.provider.db.generic.SentryGenericProviderBackend

CDAP

These properties will be defined in cdap-security.xml

security.authorization.enabled

security.authorizer.class

Role Management

To support RBAC (Role Based Access Control) such as Apache Sentry we will need to support role management through CDAP.

A user using RBAC should be able to:

• Create a role
• delete a role
• add role to principal (where principal can be of type user or group)
• remove role from a principal (where principal can be of type user or group)
• List roles
• List roles for principal
• List privileges for role

We will need to support this operation from through REST  APIs and also through cli. Below is the proposed APIs and CLI commands:

Authorization API

Security CLI commands

ACL management

There are multiple options for ACL Management. For dataset-based authorizer, we will have to support ACL Management via the CDAP CLI.

...

Although supporting the Sentry Shell seems straightforward once the CDAP backend for Sentry is implemented, it's a relatively new feature added in Sentry 1.7 (SENTRY-749). CDH 5.5 ships Sentry 1.5 and there are no timelines on support for Sentry 1.7 (Cloudera Maven Repository).CDH 5.5 ships Sentry 1.5 and there are no timelines on support for Sentry 1.7 (Cloudera Maven Repository).

After some digging we found out that SentryShell is hardcoded to use work with Hive and it works only with Hive. At the moment of this writing, Kafka is added support for SentryShell by making a copy for Hive's SentryShell. This seems to be the norm in Sentry for Shell support since there is no generic Shell which can be used by the services being integrated to Sentry. Unless we have some strong reason we should avoid having support for CDAP through SentryShell, specially since we are already working on supporting ACL management for CDAP in Sentry through Hue. See below. 

For recognizing and listing CDAP entities in Hue, we will have to implement a CDAP Webapp for Hue. Hue is implemented entirely in Python using the Django framework. This integration is a risk for 3.4. More details on this TBD.

Hue Integration

Testing

For testing the sentry integration, there are a couple of approaches. We can use the file-based policy store in Apache Sentry for tests. However, to simulate more realistic scenarios, we should explore if it is easy to setup an in-memory database (HSQL, etc) with the Sentry schema in tests.

...